Professional 980+1470nm Diode Laser Device for Fat Reduction, Skin Tightening and Minimally Invasive Treatment

Professional 980+1470nm Diode Laser Device for Fat Reduction, Skin Tightening and Minimally Invasive Treatment

1. Product Technical Principle

What is 980+1470nm Diode Laser Fat Reduction?

The 980+1470nm Diode Laser Panacea System is an advanced dual-wavelength laser device designed for precise fat reduction, tissue coagulation, and minimally invasive surgery. It combines two complementary wavelengths to target different tissue components for maximum efficiency.

• 980nm wavelength is strongly absorbed by hemoglobin and water in superficial tissues. This allows it to provide rapid coagulation, controlled ablation, and hemostasis. It helps shrink blood vessels around the treatment area, reducing bleeding during procedures and enhancing tissue precision.

• 1470nm wavelength is highly absorbed by water in deeper tissue layers. It delivers thermal energy directly into fat-rich or water-rich tissues, promoting fat cell shrinkage, collagen contraction, and skin tightening. This wavelength allows deep, controlled treatment with minimal impact on surrounding tissue.

How does it work?
The system emits laser energy through a Biquartz optical fiber, allowing precise targeting of treatment areas. The combination of pulse, continuous, and single modes enables practitioners to control energy delivery according to tissue type, depth, and desired effect. A 650nm red aiming beam ensures accurate positioning without affecting tissue.

During treatment, the dual wavelengths work synergistically: the 980nm laser focuses on coagulating superficial vessels and controlling bleeding, while the 1470nm laser penetrates deeper to target fat cells, stimulate collagen remodeling, and promote skin tightening. The controlled thermal effect allows non-invasive fat reduction, vascular treatment, and tissue remodeling in one device.

Key Benefits:

• Dual-wavelength precision for superficial and deep tissue targeting

• Minimally invasive fat reduction and body sculpting

• Skin tightening and collagen stimulation

• Reduced intraoperative bleeding and improved safety

• Adjustable pulse width and frequency for personalized treatment

• Efficient energy transmission via optical fiber for stable and accurate results

This system is ideal for clinics and medical facilities that provide aesthetic body sculpting, minimally invasive surgery, and skin rejuvenation, offering high efficacy with minimal downtime.

2. Application Scope

The 980+1470nm Diode Laser is versatile and suitable for a wide range of aesthetic and medical applications:

• Localized Fat Reduction: Effectively targets stubborn fat deposits in areas such as the double chin, abdomen, arms, flanks, thighs, and knees.

• Non-surgical Body Contouring: Provides sculpting results comparable to minimally invasive liposuction, without incisions or sutures.

• Skin Tightening & Rejuvenation: Stimulates collagen remodeling, improving skin elasticity and firmness post-lipolysis.

• Combination Aesthetic Treatments: Can be used alongside other procedures for comprehensive aesthetic enhancement, such as skin rejuvenation or cellulite treatment.

• Endolift and Lipolysis Procedures: Safely reduces fat while contouring the face and body, suitable for both cosmetic clinics and professional aesthetic centers.

• Improved Metabolic Activation: The heat effect not only destroys fat cells but also enhances local blood circulation and lymphatic drainage, promoting better recovery and long-term results.

This device is ideal for patients seeking non-surgical fat reduction, body sculpting, and skin tightening in one procedure, making it a versatile solution for aesthetic clinics.

3. Product Attributes

• 6+1 Handpiece Design: Multiple fiber handpieces allow precise targeting of different areas of the body, from small areas like the double chin to larger regions such as the abdomen and thighs.

• Non-invasive Treatment: No incisions or sutures are required; minimal bleeding and swelling, with short recovery time.

• Integrated Cooling System: Protects the skin surface during procedures, maintaining patient comfort and safety.

• Digital Touch Screen Control: Enables operators to adjust energy parameters, pulse width, and frequency in real time for personalized treatments.

• Dual-function Technology: Combines fat reduction with skin tightening and collagen stimulation, giving patients natural and comprehensive body contouring results.

• Long-lasting Durability: The handpieces are designed for thousands of procedures, ensuring reliable performance over many years.

Treatment Procedure

1. Patient Assessment and Consultation
   Before the procedure, evaluate the patient’s body area, skin type, fat distribution, and overall health condition. Discuss the treatment goals, expected results, number of sessions required, and any possible risks or side effects. Ensure the patient understands pre- and post-treatment care instructions.

2. Preparation of the Treatment Area
   Clean and disinfect the target area thoroughly. Mark the treatment zones if necessary to ensure even coverage. Remove any clothing, jewelry, or items that may interfere with laser delivery. Position the patient comfortably to allow precise access to the treatment area.

3. Device Setup and Parameter Selection
   Select the appropriate laser wavelength(s) based on treatment goals: 980nm for coagulation and superficial tissue targeting, 1470nm for deeper fat reduction and collagen remodeling. Adjust power, pulse width (15ms–100ms), frequency (1–20Hz), and spot size according to the patient’s tissue characteristics and desired intensity.

4. Laser Application with Fiber Delivery
   Use the Biquartz optical fiber to deliver laser energy directly to the target area. The 650nm aiming beam ensures precise positioning. Begin with a conservative approach on sensitive areas or first-time treatments. The operator moves the fiber methodically across the treatment zone, ensuring consistent energy delivery.

5. Sequential Multi-Wavelength Treatment
   For optimal results, use the dual wavelengths synergistically. Apply the 980nm laser for superficial coagulation and hemostasis first. Then, deliver the 1470nm laser for deeper fat targeting, tissue contraction, and collagen stimulation. Adjust the number of passes and energy based on real-time tissue response.

6. Monitoring and Immediate Assessment
   Observe tissue response during the procedure, including mild warming, contraction, or slight redness. Continuously ensure patient comfort and skin safety. Make minor adjustments to energy output or fiber speed as necessary.

7. Cooling and Protection
   Use the device’s integrated water and air cooling system throughout the procedure to protect the epidermis, minimize discomfort, and prevent thermal injury.

8. Post-Treatment Observation
   After treatment, inspect the treated area for any immediate reactions such as mild redness or swelling. Provide the patient with post-treatment instructions including avoiding direct sun exposure, using soothing creams if necessary, and following activity restrictions.

9. Follow-Up and Results Tracking
   Schedule follow-up sessions as needed, typically spaced according to the treatment plan. Track fat reduction, skin tightening, and overall patient satisfaction. Adjust parameters in subsequent sessions for optimal results.

10. Safety and Hygiene Protocols
    Ensure strict hygiene throughout the procedure. Clean and sterilize the fiber and device surfaces before and after each session. Monitor patient responses to avoid complications and ensure consistent, safe results.

5. Pre- and Post-Treatment Notes

Pre-Treatment Care

1. Patients should undergo a full medical evaluation to ensure suitability for laser treatment.

2. Avoid direct sun exposure or tanning of the treatment area for at least 2 weeks before treatment.

3. Do not apply lotions, oils, or topical products on the treatment area on the day of the procedure.

4. Inform the clinician about any medications, supplements, or recent treatments that may affect laser sensitivity.

5. Remove all jewelry, clothing, or accessories covering the treatment area.

6. Pregnant or breastfeeding women should avoid treatment.

Post-Treatment Care

1. Apply soothing or hydrating products recommended by the clinician to reduce redness and swelling.

2. Avoid intense sun exposure or tanning for at least 2–4 weeks after treatment; use sunscreen when outdoors.

3. Do not scratch, rub, or massage the treated area excessively to prevent irritation.

4. Avoid strenuous exercise, saunas, or hot baths immediately after treatment to reduce inflammation.

5. Follow any specific instructions for compression, dressing, or activity restrictions as advised by the clinician.

6. Attend follow-up sessions as recommended to achieve optimal results.

6. Contraindications

Patients with severe cardiovascular, metabolic, or systemic diseases.

Pregnant or breastfeeding women.

Patients with active skin infections, wounds, or open lesions in the treatment area.

Individuals with photosensitive conditions or a history of abnormal skin reactions to light.

Patients with implanted electronic devices (e.g., pacemakers) in or near the treatment area.

Individuals with uncontrolled diabetes, clotting disorders, or immunodeficiency.

Patients currently using medications or supplements that increase photosensitivity or impair healing.

FAQ

1. How safe is the lipolysis procedure?

• The 980+1470nm dual-wavelength laser selectively targets fat cells while preserving surrounding tissues. Integrated cooling and precise pulse control minimize the risk of burns or tissue damage, making the procedure safe and minimally invasive.

2. What areas of the body can be treated?

• Common areas include double chin, abdomen, arms, flanks, thighs, knees, and other localized fat deposits. The device is also effective for small facial areas and skin tightening.

3. How many sessions are needed to see results?

• Visible improvements can often be seen after 1-3 sessions, depending on the area treated and individual metabolism. Optimal results usually appear after 3-6 sessions with appropriate intervals.

4. Is the procedure painful?

• Most patients feel mild warmth or tingling in the treatment area. The integrated cooling system and adjustable laser parameters ensure comfort throughout the procedure.

5. How long is the recovery period?

• Recovery is minimal. Patients can resume normal activities immediately. Mild redness or swelling may occur but typically resolves within 24-48 hours.

6. What is the lifespan of the handpieces?

• The laser handpieces are designed for thousands of procedures. With proper care, they maintain consistent performance over many years.

7. Are there any consumables required?

• No additional consumables are needed for normal operation, except standard maintenance such as cleaning the handpieces and fiber tips according to the user manual.

8. What is the warranty and support?

• The device comes with a 1-year warranty. Any technical issues can be handled online or through our engineering support. PDF manuals and training materials are provided to guide operators.

9. Who is not suitable for this treatment?

• Pregnant or breastfeeding women

• Patients with severe cardiovascular or systemic diseases

• Those with active skin infection at the treatment area

• Patients with implanted electronic devices, such as pacemakers

Why Choose Gomecy

1. High-Quality, Proven Technology

• Our 980+1470nm diode laser devices are designed for precision and effectiveness, with dual-wavelength technology ensuring safe, efficient fat reduction and skin tightening. All machines are tested and optimized for long-lasting performance.

2. Comprehensive Support and Warranty

• We provide a 1-year warranty and full online technical support. PDF manuals and training materials are included, so you never face technical challenges alone.

3. Extensive Experience in Aesthetic Devices

• Gomecy has years of experience in producing and exporting advanced aesthetic and physiotherapy equipment. Our engineers understand both clinical requirements and practical usage, ensuring reliable, professional solutions.

4. Customer-Focused Service

• From pre-sales consultation to post-sales support, we are committed to helping clients choose the right device and achieve the best results. Our service includes guidance on device maintenance, handpiece care, and optimal treatment parameters.

5. Safe and Durable Devices

• Our handpieces are built for thousands of procedures, and all machines undergo strict quality control to ensure safety, stability, and long-term durability.